Home > Black Screen > "windows 7" Black Screen Solution

"windows 7" Black Screen Solution

Contents

Reply Mcrave says: January 12, 2010 at 1:42 am I have the same problem, I read around, it suggests that there might be a hardware problem but I didnt want to any ideas what's wrong with it? I wa sable to press f8 to get to safe mode with networking option and access the internet and check my solution and response from Norton iot was a corrupt download! Reply Matt says: October 7, 2009 at 12:31 am I found that sometimes when the hard disk is under stress… like sudden laptop shutdown or physically under vibration, that hard disk weblink

It will give a C:\Windows command line prompt (or D\Windows depending on what partition was selected). Reply Jorj says: April 17, 2009 at 9:34 am I've got the same problem - Hangs before login screen at a blank screen with the cursor. I started it saturday and would run up to the microsoft corporation scrolling bar and then just stay on a black screen with the power light staying green. Preventing the blank screen If disconnecting devices from the computer resolved the startup issue, connect one device, and restart the computer. http://ccm.net/forum/affich-33850-black-screen-upon-startup-wont-run

"windows 7" Black Screen Solution

What can I do. didydan118 19.000 görüntüleme 5:25 Vista 32 Bit Black Screen of Death on Boot - Süre: 2:20. I installed a new interal bluetooth module on a Dell Inspiron 1720.

  1. Hoping that all application that is still loaded in the memory will dissipate and then I can reboot again.
  2. My problem started when I inserted the Windows Vista disc in to upgrade.
  3. I also kept checking to see if anything had appeared on the screen.
  4. My motherboard and video card have BOTH been replaced TWICE in 1 week.
  5. but here's what happens: - I turn on and hear the "beeep" - I see the "downloading bar" appear and finish - Then black screen with only the cursor BEFORE the
  6. If the image displays on the LCD display in low resolution, you can download and install the latest drivers for your specific graphics driver.

I have a Dell 1521 laptop running Vista. Helpful +42 Report narniafan Dec 1, 2009 at 02:38 PM Last Monday, I was in Microsoft Word when the screen froze. It will show the mouse but that's all. How To Fix Windows Vista Black Screen On Startup Britec09 590.092 görüntüleme 5:49 How to fix Black screen after logon, on windows 8.1/8/7/vista, maybe XP too - Süre: 1:58.

If the problem does not re-occur, then you can start installing other programs. Vista Black Screen I came home & my laptop started up normally. William Yu 3.919.173 görüntüleme 12:33 How to fix computer black screen - Süre: 3:03. https://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-vista-wont-boot-black-screen-after-windows/c092d2a6-cfbe-4dd9-9bee-4f3fb3419100 There can be too many things that would cause this to happen to discus here.

I do remove all the garbage-ware on them, though.Turned out that the hard drive went out, after only 2 days.It was running smooth and fine up until that, though. "windows 7" Black Screen Fix If these setting were the source of the problem, it should now be able to boot normally. Reply Melissa says: January 25, 2010 at 2:14 pm Does anyone know what this is at all? The big test.

Vista Black Screen

Im At My Wits end trying to fix this thing, is there really no one out there with a solution to this?

Symptoms: Visa Home on emachines laptop - boots okay then goes to black screen with cursor and disk activity but nothing else I had tried everything else F8 / Bios / "windows 7" Black Screen Solution The hdd start spinning but no boot up sequence seen. Windows Vista Boots To Black Screen No Cursor Reply Dave says: November 28, 2008 at 10:42 am Thanks partner!

Now that all of Windows was gone, still no BIOS screen.We also had the other dead laptop after an update but that one was the famous DV6000. have a peek at these guys The reason I'm posting is because I find this post very helpful. Once back in, go to start -> settings -> control panel, and open "automatic updates" and select "turn off automatic updates". Report puksnik- Dec 19, 2009 at 04:56 AM Good day, mine laptop just started misbehavin after windows update, attimes, feel like smashin it. Windows Vista Black Screen After Login

If your info is correct I am now in a vicious circle and the blaqck screen will be mine forever. Subscribe to our newsletter Sign Up Team Terms of Use Contact Policies CCM Benchmark Group health.ccm.net Black screen upon startup, wont run. - page 2 Knowledgebase Guides Our Recovery Disks for Whenever starting the safe-mode with command prompt (Really ANY safe-mode) I get some weird /WINDOWS/SYSTEM32/DRIVERS/etc.. check over here Things I've done:1.

my parents were gonna kill me! Vista Black Screen With Cursor Fix Command Prompt But after that it just went dead. At least anger shows they're still in the game, trying to hold onto what they can with the investment they made in a hard-earned computer.

artifexcaptus 6.050 görüntüleme 9:50 How To Fix Black Screen Of Death Vista - Süre: 5:25.

now i can just login and it goes straight to the desktop…wooohoo hope this helppps Reply Sam says: January 26, 2010 at 11:24 pm Hey guys I had the same problem I was gonna format my laptop…..I'll report back if problem comes back. Make sure your computer is powered down. Black Screen Of Death Vista It asks the simple things such as "Run in safe-mode, Run with Command Prompt, run with default before this occurred, or run normally.) Either one of these I press it just

I've attend 10 minutes but the screen remaining black. I thought it would be a good idea to install the update regardless of whether it would actually impact the game, so I did. I did this with mine. http://juicecoms.com/black-screen/computer-black-screen-on-startup-windows-10.html I've been reading everyone's responses and so far nothing is identical to the issue I'm having.

It has 3 years warranty and I'm still giving it another day I'm draining all the battery plus the CMOS battery to reset it. The standard drive is usually C:\ Select Startup Repair and wait for the process to finish. I'll share where and what I've done to get out of the jam. Then the screen goes black, I can see the hard drive working and it's been 15 minutes.

It's like this with all the Safe Modes too. I dont know what to do .. Report Nik- Sep 1, 2009 at 11:00 AM Hi, I happened to check one of your posts as my HP Tx 2009 would just not start. Report Kunkun- Jan 14, 2010 at 11:28 AM Hi, I have the same problem as yours.

Yükleniyor...